1. Introduction
This machine is used for milling the end
face of H-beam, box-beam and cylinder. The milling head is 0°--45° adjustable
so as to mill the required bevels of end face of beams.
2. Main Parameters
|
Model
|
DX1215
|
DX1520
|
|
Suitable work-piece height (mm)
|
1200
|
1500
|
|
Suitable work-piece width (mm)
|
1500
|
2000
|
|
Milling head power (kW)
|
5.5
|
|
Vertical milling speed (mm/min)
|
55—500
|
|
Horizontal milling speed (mm/min)
|
50—440
|
|
Milling angle (°)
|
0°--45°
|
|
Power supply
|
AC380V, 50HZ, 3P or tailor made
|
|
Above are our standard models and parameters, and it can be
designed and manufactured on request.
|
*We reserve the right to alter
specifications without prior notice.
3. Main features
The standard models of our end face milling
machines have the following features:
 Robust all steel fabrication with stable structure and good
rigidity, and no deformation after long time using;
The bed is welding structure, annealed after welding.
Facer is TX32A type, of reasonable structure, reliable performance,
extensive speed range, good rigidity, low noise, high efficiency and convenient
operation.
Slide table is forged into shape, composing into sliding-couple with
bed;
Standard facer available in any local market;
With work-piece hydraulic clamping and positioning rack;
All motion parts have lubrication system;
Main electric elements are ABB/Siemens brands;
Standard color:
4. Structure drawing
5. Reference photo
| 
ENGLISH
簡體中文
